广州巨曜电子配件厂
Guangzhou Juyao Electronic Accessories Factory
Product Detail
4 digits Time Control Timer Board Power Supply for coin acceptor selector, pump water, washing machi 
Collect
|
Detail

product

15b

DSC08031DSC08032DSC08033   DSC08038

 

DESCRIPTION

Manual

PAGE-1

 

JY15B Timer Board

Description


Input VoltageDC+12V
StandbyDisplay shows:00:00, reply: Normal Open (NO)
Accumulated timeYes, add time if receive signals again when time is running
Max current load15A
How it works
Mode 1Time runs down after receive signals-> Display shows remaining time and supply power to device-> it cuts off power after time runs out
Mode 2
(Connect a button)
Display shows remaining time after receive signals-> push button start-> time runs down and supply power to device-> it cuts off power after time runs out
Pause
(connect a button)
Push button pause: it cuts off power when pause, display shows remaining time.  Re-supply power after push button pause again
Operating ModePlease reference to page 2

 

Connection and Position

 

1: Display                         2: 40 cm white lead
3: OUTPUT power to controlling device:
control single wire from controlling device.
4: AC jack-5.5mm*2.1mm
5: YELLOW: DC12V, WHITE: input signal, BLACK: GND
6: START for mode 01:02            7: Pause
8-11: Button S2, S1, S3, and S4

 

1

Setting

Please follow CODE ON DISPLAY and use button "S1" and "S2" to set up number

  • INPUT SIGNAL QUANTITY AND TIME
  1. Please press button "S4". “B” flashes. Please set up INPUT SIGNAL QUANTITY to active device (01-50).
  2. Please press button "S4", “A” flashes. Please set up TIME (01-99).
  3. Please press button "S4", “B” flashes. Please set up TIME (01-99).
  4. Please press button “S4” 4 TIMES.
  5. Please set up TIME for Warning Sound.
  6. Please press button "S4" to finish.

--------------------------------------------------------------------------------------------------------------------------PAGE-2

  • GIVEN TIME: Add time by free if input signals reach SETTING RATE during time is running.
    Example Setting: input signal to active device: 01, input signals for given time: 03 give time: 02:10
                                 Add time “02:10” free if receive “3 signals” during time is running.
  1. Please press button "S4" 4 TIMES. “B” flashes. Please set up RATE OF INPUT SIGNAL QUANTITY.
  2. Please press button "S4", “A” flashes. Please set up GIVEN TIME.
  3. Please press button "S4", “B” flashes. Please set up GIVEN TIME.
  4. Please press button "S4" to finish.
  • Mode Setting

Please follow table to set up operating function:

  1. Please hold on button "S1" and "S2" simultaneously for 3 seconds to get into MODE SETTING.
  2. Please use button "S1" and button "S2" to set up number for CODE
  3. Please press button "S4" to switch to next code

Function

Code on Display

Description

A

B

Running Time

01

01

Time runs down without pressing button

02

Time runs down by pressing button

Time Type

02

03

MINUTE: SECOND

04

HOUR: MINUTE

Memory

03

05

Yes: Remaining time keep running after power off and on

06

No: Standby power off and on

Back to standby

04

1-30

user has no action after push buttons or receive signals in setting time

Default: 01-03: Bold and base line. 04: not use the function.

 

 

Connection Example

 

 

size

Main board

Display